Indventech LLC
www.indventech.com
1361 W. Wade Hampton Blvd Ste F-135 Greer, SC 29650
888-864-4344
sales@indventech.com
www.indventech.com
1361 W. Wade Hampton Blvd Ste F-135 Greer, SC 29650
888-864-4344
sales@indventech.com
Horizontal cartridge filter unit, effective even in large space
Coral IPERJET DF TOWER Air Purification system is a horizontal cartridge filter unit for suction and filtration of welding and thermal cutting fumes, coarse and fine dusts. IPERJET DF TOWER is designed for applications where local capture of contamination is not possible or adequate and full room filtration is required. Those applications would include installations where the following situations occur.
Manufacturer |
N/A Coral USA |
Filter |
N/A Cartridges |
Cartridges (nr) |
N/A 9 |
Cartridge height |
N/A 48 in |
Cartridge diameter |
N/A 13 in |
Voltage |
N/A 230/460 V |
Frequency |
N/A 60 Hz |
Tank volume |
N/A 16 gal |
Filtering surface |
N/A 1948 sqft |
Max air flow |
N/A 11760 cfm |
Rounds per minute |
N/A 3450 rpm |
Power |
N/A 11 kW1,5 hp |
Noise pressure |
N/A 72 db(A) |
Weight |
N/A 3308 lbs |
General Description |
N/A
Iperjet DF series cartridge dust collectors are the ideal solution for indoor air treatment, through small centralized systems or – where installation of a centralized system is not possible – by positioning one or more units next to the machineries. Of different sizes according to requirements and pollutants to be removed, Iperjet DF dust collectors are ready-to-use, easily handled, and high performance. |
Applications |
N/A
|
Technical highlights |
N/A
High-performance and low-noise fan The Coral high-performance fan mounted on the top of the IPERJET DF assures a high suction capacity and quiet operation. Coral horizontal cartridges for easy access and maintenance What makes our system unique is the horizontal mounting of the specially designed Coral filter cartridges. This allows operators easy access and a quick maintenance of the filtering cartridges when required. Simply open the door, loosen four retaining bolts, twist and remove. Top performance 24/7 with Coral automatic pneumatic cleaning system The Coral electronically controlled pneumatic back pulse system keeps our high efficiency filter cartridges operating at peak efficiency. The controller constantly monitors the condition of the filter cartridges by using differential pressure, always checking the inlet pressure against the outlet pressure. Once the controller detects that the filter cartridges are clogging, a cleaning cycle is initiated. During the cleaning cycle, high pressure compressed air (7 bar – 101 psi) is released inside the filter cartridges creating a shock wave that forcibly pushes the collected solids off the cartridges. The solids fall by gravity to a second lower collection bin for removal. |
How it works |
N/A
99% solids removed from contaminated air The Coral IPERJET DF is designed so that incoming air enters the top of the unit and travels down the back side, the contaminated air then makes a 180° turn and travels straight up into the filter chamber. Due to the rapid change in direction, any heavy solids fall out of the air stream and are deposited into a first stage collection bin located at the back of the unit. Contaminated air then passes through our specially designed high efficiency filter cartridges where 99% of the harmful solids are removed. |
|
N/A
|
